Shingle roofing is the backbone of residential roofing in Marks. Whether you're choosing architectural shingles for their dimensional look or three-tab shingles for budget-friendly coverage, the installation process is what determines how long they last. Marks Roofing & Maintenance follows manufacturer nailing specs and overlap requirements on every job.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Consultation & Inspection
We inspect your existing roof deck and sheathing, measure the area, and help you choose between architectural and three-tab asphalt shingles. Color samples brought to your Marks home.
Strip & Inspect
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Ice Shield & Drip Edge
Ice-and-water shield bonded at valleys and eave lines. Synthetic underlayment over the full deck. New aluminum drip edge at every eave and rake. All flashing — chimney, pipe, vent, wall — sealed and secured before a single shingle goes down.
Shingle Courses
Field shingles installed with proper exposure and overlap. Nailed per manufacturer specs — 4 nails standard, 6 in high-wind zones. Starter strips at the eave prevent wind uplift. Ridge cap shingles finish every peak with integrated ridge vent for ventilation.
What Marks Customers Say
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
Why Choose Marks Roofing & Maintenance for Shingle Roofing?
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Manufacturer-Certified Installers
GAF Master Elite, Owens Corning Preferred, CertainTeed SELECT ShingleMaster. Our certifications mean your manufacturer warranty is fully valid from day one.